Finally I manage to make a craft update.

I don't have much followers, but I'll explain why I haven't been updating or anything for ages anyway! I've just finished some major exams (which naturally, involved major studying) so crafts had to go on hold for a while. But now I've finished my exams and don't really have that much to do... Perfect conditions for updating my blog :D Another thing is, I GOT A NEW COMPUTER!!!!! Finally, a computer that works :D (Only problem is, I have no idea how to use Windows 8...)

My Deco-notebook-thing!

So I remember I said a while ago that I'd made a decoden notebook (And now I realise how little sense that makes, as the 'den' part of decoden is a shorter form of the Japanese word for 'phone'). And here it is! After about four months since I did the decoden on it! 

close up of the deco part

Sorry you can't see it very well (the battery on my camera was running out), but it has one blue macaron in the corner and two rhinestone/pearl thing hearts at either side. 

WARNING: before you try doing decoden on notebook, try to do this on one you don't use very often/is full. It's near enough impossible to write inside your book after you do this! Trust me, I learnt the hard way!

Memory wire earrings!

I really love the way these turned out! 

Sorry I took it on my bad ear...

I really like these earrings and can honestly see myself selling ones like these in the future because they look almost like shop bought earrings (well to me, anyway). I think these are definitely one of the best pairs I've made so far. They aren't too hard to wear either, as they feel very light, which is really important because since I have such thin earlobes, I often can't wear earrings like this as they tug and pull on my ears too much and are really uncomfortable. But as you can see, they hardly tug on my ears at all!

Sorry the picture is so bright, I need to install Photoshop again...

Here's a better picture of one not being worn. As you can see, It's basically just memory wire pulled in to the shape of a tear drop/egg, and a head pin with matching beads attached to the jump rings that pull the ends of the memory wire together. It's a very basic design, but it works really well.

A dress for my little sister's birthday! (Not finished yet)

I just need to finish sewing the lace at the bottom. My sister loves lace.

So, a few weeks ago I acquired a very old sewing machine from my Grandma (thanks, Grandma! Even though you don't have connection to the internet and so will probably never see this!). The tension messes up a lot, but still, It's much easier than having to sew the whole thing by hand. I only have one picture of it at the moment, but I'll take more when it's finished as my sister wants to have a picnic for her birthday party. I know that sounds a little strange for a 9 year old these days, but she really wants to have one, and hey, it's HER birthday! (starting to go off topic, are we?)

I also managed to make macarons! For my first try, they don't look that bad. They're strawberries and cream flavour, but the shells are just plain. We tried to make them pink, but they came out more of an orangey colour. They tasted really good though! It's the first time I ever ate macarons too, but they were great :D I bet I'll have to make some more for my sister's birthday!

Ear Cuffs method 2

Hey, I bet you thought I was never going to make another ear cuff tutorial! Well, today we're going to learn how to make the really cool ones that connect to earrings! I'd just like to warn everybody and say: please make sure your piercing is 100% healed. New piercings rip easily, even after the initial 6 weeks. I guess it's especially easy to tear your earlobe with something like this! So please be careful, ok?

This is what it looks like so
far on my ear

We're going to start off by making a basic ear cuff, using the first method. I'm using a slightly different design and I'm using 16 gauge wire. You can use any design or thickness, as long as it starts with a loop and ends with a loop. If you like my design though, I don't mind if you use mine. Just try not to do it EXACTLY like mine please...









If you have some jewellery making earring studs like the ones in the picture to the right, congratulations! You've just made life LOADS easier, and can skip the first 3 steps! Tip: if you don't have pierced ears, you can use clip on earring findings!



1. We need to make the studs! As already mentioned, you can buy studs like these. I took some waste polymer clay and rolled it in to a ball. Then I actually took a clean, nickel free head pin and used it to make the post. I don't recommend doing this unless you're really sure you know what you're doing is safe, and won't cause you an infection (not all head pins are nickel free, the same thickness as normal earrings, etc). If you have some flat, jewellery making studs, use them.

2. Now you need to take a piece of wire and use it to make a short eye pin. Then you push it in to the clay and you're done!

3. Bake. You don't have to take the metal post or eye pin out.
4. While your stud is baking, you can do the next step! (of course, if it's not baking/you don't need to bake it, you still have to do this step lol!) We're going to put a jump ring through the lowest loop on the cuff. I'm using one of my larger jump rings. Now attach your chain. You need to make sure you have a good amount of chain, as this will connect to the stud. But not too much, or else you're going to just make it heavier and it just won't look as nice!

Now your cuff should look like this:

5. Oh, look! The stud part has finished cooking now! (I assume I will have startled at least one person by saying that lol) Now we're going to finish it up by attaching the stud! This part is simple: just use a jump ring to attach it to the chain.

Tip: If you have more than one piercing in your ear lobe, you can make a cuff with multiple studs connected to it. 

Ok, the next ear cuff tutorial I'll be making will be a little different! I'm going to be showing you guys how to make ear wraps, they're extremely similar to ear cuffs, but they sit behind your ear.

How to make eye pins

for beading, it's best to use head pins, because they have flat head (but you can get them with different shaped heads). For polymer clay charms, you can use either head pins or eye pins. It's probably best to use head pins on charms that are flat at the bottom, and I find it's best to make the eye at the top after you've baked it. 

To make the eye pin, or make an eye in the head pins, it's very simple. You need round nose pliers to do this, and if you're making your own eye pins, you need wire (preferably quite firm/hard wire) and wire cutters. 

You just basically take the wire and form a loop in the top of it. You can make lots at once, or make them as you need them. I usually make them when I need them, but you can do whatever suits you. 

If, like me, you think this style is way too boring, you can try my style of eye pin! :D

Sorry the quality is so bad, but you basically need to make your normal eye pin, then bend the wire back on itself to make another loop. After this, you make one more between the first two. This one is like the 'eye' where you will put through your jump ring or whatever else you want to put in. The wire should go away from the 'eye' after this. You can cut the end off after this, but make sure you leave a good amount of room on the eye pin so it has enough room to go through the clay charm or whatever else you want to use it for.

Tips on making eye pins stay in polymer clay!

You won't have this problem if you are using head pins, but you can't always use head pins. Some times, you can only really use eye pins. The only real problem is, they tend to fall out. Usually what I do, is I pull the eye pins out after I've baked the clay and put glue on the pin. But there's a better way :)

If you make the pin an L-shape before you put it inside, it shouldn't fall out.

After you've put it in, squeeze the charm around it so it stays in. This is quite a common trick to use, but it is very useful to know :)

Memory Wire Bracelet

Last year I went to a continental market, and there was a stall there that was selling memory wire bracelets with silver plated beads. They were really pretty so it bought one, it was £8. It took me forever to work out how they made it :)

I eventually worked out that it was just beads on memory wire. It's super   easy to make. In fact, I felt stupid when I worked it out, lol!

Never mind :)

Anyway, as I said, it's pretty simple to work out yourself. All you need is  a few rings of memory wire and LOTS of beads. If you feel creative, you can try making the beads :D.

How to make Ear Cuffs: method 1

I love ear cuffs :) They're so cute, and you don't have to go through all the pain and after care that comes with a real piercing. All you do is put them on your ear and you're done.

I thought of several different ways to make Ear Cuffs, each method requires a strip of wire. You can add on beads, chains... If your ear piercing is 100% healed (be careful... newly pierced ears rip easily) you can join it all together using studs or tiny hoop earrings and it'll look really cute and unique :D

My ears look so weird lol!

In this tutorial, I'm going to show you how to make a relatively small cuff, like the one in this picture :)

Basically, all you do is make the design flat, and then use something round (such as a paint brush) to make it curved.






1. It's easier to draw your design out on paper first. Draw it in the way you want to make it. Curve your pencil around and DO NOT take it off of the paper. You might find you have to re-do it a few times :) But it will give you a good idea on how you want to make it. Tip: you want to start it with a loop and end it with a loop. You can make them whatever shape, as long as it makes a continuous loop that doesn't have any gaps. Remember, we start by making it flat.

2. Make your design.

You can thread on beads and make the design in whatever shape. Make sure it isn't too long, make it a little shorter that I made mine. Remember, it has to start with a loop of some sort, and end with some sort of loop. By the way: if your wire is soft enough, you might find it easier to actually use your fingers to form the shape of the wire.

3. Use a paint brush/pen to curve to design around.

You may find you have to use your fingers to change the shape so it suites it more.

And you're done :)

To put it on your ear, slide it on to the top of your ear where the cartilage curves around (I believe it's called the 'helix'), and gradually make your way down until you find it sits comfortably. For some people, you'll find it slides in to a comfortable position quite quickly. For others, it'll take a while to find that position where it fits nicely. It all depends on the structure of your ear.

I'm going to make some more tutorials on how to make ear cuffs. I'll show you how to add charms, stud earrings and chains...